News & Press Releases
Senator Jeanne Shaheen Cuts the Ribbon at Warner Power's new Hollis Facility
Published on Wednesday, 22 February 2012
Opening of Warner Power's New Hollis, NH Facility By U.S. Senator Jeanne Shaheen
Published on Tuesday, 14 February 2012
Warner Power announces the official opening of its new manufacturing facility in Hollis, NH, on Tuesday February 21, 2012.
Warner Power Responds to the Department of Energy Notice of Proposed Rule-Making (NOPR); "Energy Conservation Standards for Distribution Transformers"
Published on Thursday, 09 February 2012
This editorial expresses Warner Power’s view of the process and results so far. Warner Power encourages debate on this important topic.
WARNER, New Hampshire - This exercise was initiated on a ‘fast-track’ as part of the court settlement in respect of the alleged failure of DOE to meet its statutory obligations under the Energy Policy and Conservation Act of 1975 (EPCA) and amendments thereto under the National Energy Conservation Policy Act of 1978 (NECPA) and the Energy Policy Act of 1992 (EPACT 1992). Distribution transformers were included in the group of covered commercial equipment in EPACT 1992. This settlement required DOE to publish a revised rule not later than October 2012 for a number of covered products, including low-voltage distribution transformers as required by Section 135(c) of the Energy Policy Act of 2005 (EPACT 2005). Pursuant to EPCA, any new or amended energy conservation standard that the DOE prescribes for distribution transformers shall be designed “to achieve the maximum improvement in energy efficiency that is technologically feasible and economically justified”. Furthermore, any new or amended standard must result in a “significant” conservation of energy.
Warner Power announces compliance with UL 60601-1 & IEC 60601-1 (3rd edition) for Medical Device Safety
Published on Wednesday, 21 December 2011
Warner Power has announced that its medical grade electronic ballast products for Xenon lamps from 75W to 300W have been approved by UL in conformance to UL 60601 & IEC 60601 (3rd edition).
Warner Announces Its Patent Filing for Distributed Power
Published on Tuesday, 06 December 2011
'Power at the load' for electrically powered industrial furnaces, including vacuum furnaces and crystal growing furnaces.
Warner Power's Hexaformer Plant in Hollis, NH is Fully Operational
Published on Monday, 07 November 2011
Warner Power Publishes a New Energy White Paper Focusing Attention on Transformer Losses
Published on Tuesday, 11 October 2011
Warner Power’s new White Paper Reducing Energy Losses in Low-Voltage, Dry-Type, 3-phase Distribution Transformers highlights how a typical distribution transformer, meeting Federal Standards, can still cost its owner 7 times its capital value, in lifetime energy losses. ‘Legacy’ transformers in the field, are shown to be even worse, with a lifetime cost of ownership 40% higher still.
Warner Power earns ISO 9001:2008 certification with zero non-conformances
Published on Monday, 12 September 2011
WARNER, New Hampshire - Warner Power is proud to announce that, TUV USA, a member of TUV NORD Group, has completed the ISO 9001:2008 Surveillance Audit of Warner Power. The results of the audit indicated full compliance with zero non-conformances.
Warner Power announces the opening of a new manufacturing facility in Hollis, New Hampshire.
Published on Monday, 12 September 2011
President and CEO Ed Randall explains, "We are introducing a line of highly innovative, energy-efficient transformers to the US market. We believe this is the right time, as commercial and industrial consumers are looking to cut energy costs, and go 'green'. This exciting new product aligns with upcoming Federal transformer standards, which are expected to require 30% lower losses, compared to the current standard and approximately 50% lower losses, compared to older transformers in service".
We are delighted to announce that James (Jim) Munley has joined Warner Power as its Vice President of Engineering.
Published on Monday, 07 February 2011
WARNER, New Hampshire - We are delighted to announce that James (Jim) Munley has joined Warner Power as its Vice President of Engineering.
We are pleased to announce that Kathleen Betz has joined Warner Power as the Director of Quality Assurance.
Published on Thursday, 23 December 2010
WARNER, New Hampshire - We are pleased to announce that Kathleen Betz has joined Warner Power as the Director of Quality Assurance. Kathleen has extensive manufacturing knowledge and a strong background in implementing quality system improvements. Her most recent position was Quality and CMMI (Capability Maturity Model Integration) Deployment Manager at Mercer Engineering Research Center. Kathleen's career also includes co-authoring the "Certified Quality Process Analyst Handbook" for ASQ Quality Press. Additionally, she held a range of positions at various sites within General Motors Corporation such as Quality Systems Engineer, Process Control Manager and Quality Launch Manager. Kathleen has also served with the United States Air Force as Captain, Acquisition Project Officer.
We are pleased to announce the appointment of Souheil Benzerrouk to Director of Advanced Technology, effective September 13, 2010.
Published on Monday, 13 September 2010
WARNER, New Hampshire - We are pleased to announce the appointment of Souheil Benzerrouk to Director of Advanced Technology, effective September 13th.
U.S. Senator Jeanne Shaheen (D-NH) and Assistant Secretary Cathy Zoi, U.S. Department of Energy, Visit Warner Power on April 16, 2010
Published on Friday, 16 April 2010
WARNER, New Hampshire – "It's been a big day for Warner Power", said CEO Edward C. Randall, as he provided details of the visit by US Senator Jeanne Shaheen, accompanied by Assistant Secretary Cathy Zoi of the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy (EERE).
Warner Power announces Governor John Lynch appoints Peter Amos to the new Green Launching Pad Advisory Council.
Published on Wednesday, 10 February 2010
WARNER, New Hampshire - New Hampshire Governor John Lynch has appointed Warner Power Senior Vice-President Peter Amos to the new Green Launching Pad Advisory Council. First showcased in the Governor's state of the State speech, the Green Launching Pad Initiative, will receive extensive financial, operational, technical and managerial support to help launch and commercialize green energy products and services.
Warner Power is proud to be recognized by Governor John Lynch of New Hampshire in his recent state of the State Address.
Published on Thursday, 21 January 2010
WARNER, New Hampshire - Warner Power is proud to be recognized by Governor John Lynch of New Hampshire in his recent state of the State address: Governor Lynch said, "Clean energy holds great potential for bringing new jobs to our state. Companies like GT Solar in Merrimack are already leaders in their fields. Other New Hampshire businesses are developing new products with tremendous promise. Warner Power has created new transformers with the potential to save large amounts of energy. H&E High Efficiency Power Burners in Goffstown invented a way to retrofit boilers to make them more efficient, saving people 30 to 50 percent on their oil bills. Across our state, inventors are at work creating the technologies of the future".
Products
Follow us on
